Detailed Technical Breakdown for Procurement & Engineering Teams

OEM Solutions & Capability Lines

High-integrity process equipment, fiscal measurement instrumentation, severe service flow control, and complete EPC execution.

Explore Interactive Spec Sheets Request RFQ / Tender Support

Specification Catalog

5 High-Value Technology Categories

Click across the categories below to view technical parameters, regulatory compliance mandates, and OEM specifications.

OEM Partner: Borsig ZM Compressors

Decarbonization, Flare Gas Recovery & VRU Skids

In response to stringent NUPRC zero-routine-flaring penalties, MISL integrates high-efficiency reciprocating compressor skids, Vapor Recovery Units (VRUs), and mobile process-gas compressors powered by Borsig ZM technology. These units capture low-pressure associated gas, compress it to pipeline grid pressures, and eliminate environmental emissions.

Standard Sizing & Design: API 618 reciprocating skids, multi-stage compression, ATEX & IECEx certified electrical drives.

Field Target Assets: Engineered specifically for Seplat Energy, TotalEnergies, and Renaissance SPDC JV flowstations.

Request VRU Skid RFQ Read NUPRC Flaring Whitepaper

Technical Specification Highlights

Gas Handled: Associated Gas / Sour Gas / CO2
Suction Pressure: 0.2 – 5.0 barg
Discharge Pressure: Up to 80+ barg
Drive Options: Electric Motor / Gas Engine
Compliance: NUPRC / API 618 / ISO 13631

* Turnkey packaging in consortium with Ronngate Limited (Foundations, Hook-up & Commissioning).

OEM Partner: Fluenta Ultrasonic Flare Systems

Statutory Ultrasonic Flare Gas & Fiscal Metering

Precise emissions accounting is now a statutory requirement under the Petroleum Industry Act (PIA) and NUPRC regulations. MISL supplies, installs, and calibrates Fluenta ultrasonic flare gas meters featuring high turndown ratios (up to 1:4000) and zero moving parts.

Audit-Ready Accuracy: Unchallenged data reliability for joint-venture partner allocation and regulatory flare reporting.

Non-Intrusive Spool Retraction: Hot-tap retractable transducers allow sensor servicing without shutting down production or flaring lines.

Request Metering Package RFQ

Technical Specification Highlights

Measurement Principle: Transit-Time Ultrasonic
Velocity Range: 0.03 m/s to 120 m/s
Turndown Ratio: 1:4000
Pipe Sizes: 2" up to 100"+ diameter
Hazardous Certification: ATEX / IECEx Zone 1 & 2

* In-country calibration and Level-1 workshop support in Port Harcourt.

OEM Partners: Mokveld & Rotork Bifold

Severe Service Axial Control Valves & HIPPS

For extreme pressure drops, multiphase sand erosive environments, and critical safety shutdowns, MISL integrates Mokveld zero-emission axial flow control valves, High-Integrity Pressure Protection Systems (HIPPS), and Rotork Bifold pneumatic/hydraulic directional control spares for Wellhead Control Panels (WHCP).

Axial Flow Geometry: Streamlined flow path eliminates turbulence, body erosion, and high-frequency acoustic cavitation.

SIL 3 Certified HIPPS: Ultra-fast closing times (< 2 seconds) for subsea, topside, and flowstation overpressure barriers.

Request Valve & Spares RFQ

Technical Specification Highlights

Valve Types: Axial Control, Choke, HIPPS
Pressure Ratings: ASME 150 to 2500 / API 15,000
Safety Integrity: IEC 61508 / SIL 3 Capable
Spares Line: Rotork Bifold Directional Manifolds
Fugitive Emissions: ISO 15848-1 Class A (Zero Leakage)

* Routine valve maintenance, actuator overhaul, and OEM certified parts.

OEM Partner: Strohm Thermoplastic Composite Pipes

Strohm TCP: Eliminating Niger Delta Carbon Steel Corrosion

Niger Delta swamp and land flowlines suffer catastrophic internal and external carbon-steel corrosion due to sour crude, high water cuts, and saline soil. MISL provides spoolable, non-corrosive Thermoplastic Composite Pipes (TCP) that permanently solve flowline degradation.

Zero Corrosion Risk: 100% solid composite structure impervious to CO2, H2S, microbial corrosion, and corrosive soils.

Rapid Spool Deployment: Reeled in continuous lengths up to several kilometers; installed up to 4x faster than welded steel lines.

Request Flowline Feasibility Study Read TCP Corrosion Briefing

Technical Specification Highlights

Material Technology: Carbon & Glass Fiber Reinforced PVDF/PE
Pressure Rating: Up to 10,000 psi (690 bar)
Temperature Range: -20°C to +121°C
Standards: DNV-ST-F119 / API 15S
Design Life: 30+ Years Maintenance-Free

* Ronngate provides civil trenching, horizontal directional drilling (HDD), and hook-up crews.

OEM Partners: Hi-Force & Firetrace

Hydraulic Bolting Tooling & Pneumatic Fire Suppression

Protecting personnel, critical pressure vessels, and electrical control equipment. MISL supplies Hi-Force high-tonnage hydraulic bolt tensioners, torque wrenches, and Firetrace self-activating, pneumatic cabinet-level fire suppression systems for offshore platforms and switchgear enclosures.

Hi-Force Flange Management: Subsea and topside hydraulic bolt tensioning guaranteeing zero flange leaks upon startup.

Firetrace Micro-Environment: Detects fire directly inside electrical cabinets via flexible pneumatic tubing, releasing clean agent in seconds without electricity.

Request Tooling & Safety RFQ

Technical Specification Highlights

Torque Range: Up to 71,800 Nm
Tensioner Capacity: Up to 2,500 bar operating pressure
Fire Suppression Agent: FM-200 / Novec 1230 / CO2
Actuation: Pneumatic Loss-of-Pressure (Fail-Safe)
Listing: UL / FM Approved

* Tooling rental, on-site technician deployment, and cylinder refill services.

Full Service Portfolio

Integrated Engineering & Marine Logistics

Delivering complete asset lifecycle support across engineering design, fabrication, civil works, and marine logistics.

1. Core EPC & Engineering Design

FEED & Detailed Engineering: Front-End Engineering Design, 3D piping modeling, stress analysis, and revamp project management.

Pipeline & Facility Integrity: ILI inspection support, cathodic protection, chemical cleaning, and integrity management for crude/gas networks.

2. Specialized Civil & Mechanical

Civil Infrastructure: Reinforced concrete foundations, compressor skid pads, pipe racks, and industrial access roads.

Mechanical Fabrication: High-precision spool welding, manifold construction, and ISO-certified non-destructive testing (NDT).

Precision Machining: Flange refacing, custom fittings, and critical replacement parts fabrication.

3. Marine Logistics & Procurement

Global Supply Chain: International OEM spare parts sourcing, bonded warehousing, and freight forwarding under ISO quality controls.

Offshore Marine Chartering: Management and chartering of Platform Supply Vessels (PSVs), Anchor Handling Tug Supply (AHTS), and crew transfer vessels.

Need Detailed OEM Specifications or Tender Sourcing?

Our technical sales desk is directly connected to OEM factory engineers and ready to provide custom process sizing, budgetary pricing, or tender submission documentation.

Request RFQ / Tender Sourcing Support Become an OEM Partner